TERMOGAMMA

Heat Pumps

Forever GREEN^®  Series B/AR - compact version

Forever GREEN^®  Series B/AR - compact version

(with EXIT optional for outside installation)

Forever GREEN^®  Series BS/ARS - split version (external unit)

Forever GREEN^®  Series BS/ARS - split version (internal unit)

You Save Money

Forever GREEN^® is very high quality heat pump. It is made to last for long time, because the way it works was thought with this gola in mind. A long life, associated with the fact that no maintenance is needed are factors that contribute to lower the costs, as several other aspects like for example the possibility of installing it WITHOUT AIR GAINS.

Not Only Heating

The Forever GREEN^® AR and ARS are reversible heat pumps. Thus, they can be used for winter heating AND for summer cooling, too. Therefore, the Forever GREEN^® AR and ARS can be used all year round!

Highly Reliable

Forever GREEN^® is composed by high quality elements and a very simple structural construction. These points, joined to a 20-years experience of Termogamma make of Forever GREEN^® a very reliable product.

The refrigeration circuit of Forever GREEN^® è is completely self-protected (f. ex. high and low pressure, antifreezing switch, water circuit pressure switch, compressor with internal thermal switch, etc.)

High Construction Quality

The robust and light aluminium chassis, the refrigeration circuit with triple mechanical damping, and many other details make Forever GREEN^®structure absolutely robust and durable.

No Maintenance

The reliability and simplicity of Forever GREEN^®are such, that no maintenance is needed. 

High Performances

The use of high quality components and the care taken in the adjustments of the circuit make Vulcania^® one of the most performing heat pumps of its type.

The Original Termogamma Defrosting System

With air temperatures below ca. 5°C and sufficient relative humidity, on the air heat exchanger surface some frost can build up. If left, this could become ice thus obstructing the air flow and also form an insulating layer, dramatically diminishing the heat exchange and thus the system performances. In order to remove it, a so-called defrost cycle must be performed. The defrosting is an expensive (but necessary) process in terms of energy, because during this cycle no energy is given to the user. Traditionally, the defrosting cycle is started on a time basis, e.g. each hour, when the air temperature is cold enough. It is clear that more or less frost form depending on the air moist, and consequently a time basis defrosting does not represent an optimum. 

This is the reason why Termogamma, thanks to a 20-years experience in the field, has developed an original defrosting logics and has been applied to the Forever GREEN^® air-to-water heat pump. The integrated control module surveys the cycle and reacts when the building up frost causes its change. Then, and only then, a defrosting cycle starts. This way, not only the energy efficiency is enhanced, but also the lifetime of the system is longer.

Winter conditions, where the defrosting process is not necessary due to the too small ice formation can happen quite often. This is obviously a great energetical advantage of Forever GREEN^®.

Extremely Silent

Thanks to its high performance fan, a particularly favourably air flow, the multi-damping systems, the construction quality and the thermo-acoustical insulation, Forever GREEN^® is very silent.

Minimal space impact - easy to install in every case

Often air-water heat pumps are quite space demanding, due to the necessity of move important air quantities.  Forever GREEN^®, instead, thanks for example to the geometrical characteristics of the fan is one of the most compact heat pumps of its category.  

Corner installation for minimal impact

Forever GREEN^® can be installed in the very corner of the room. This involves very low space needs.

The outlet flow direction, as well as the electrical and hydraulical connections side can be selected at the installation moment

The air flow may be directed vertically through the unit roof, to the left or to the right side. The flow direction change requires some seconds. The inlet flow can also be oriented by the means of a specific optional. The electrical and hydraulical connections side may also be selected at the installation moment. This leads obviously to a great flexibility and remarkable space savings, without mentioning the logistics advantages.

Also, the fact that Forever GREEN^® can be placed inside or outside just adding simple optionals or the it is available in split configuration contributes to lower the space needs and allows to face all kind of installation situations:

External Installation

Forever GREEN^® has been created to be placed outside the building. This is possible with the help of the EXIT optional.

Split Version

In the split version, the air unit has to be placed outside the building, while the other unit may be placed inside. The installation of a split version requires the intervention of a refrigeration technician who connects the two units with refrigeration ducts, but it should be remarked that this is a standard and simple operation for any technician.

Modern Design

Forever GREEN^®is produced with a roof electrical board. Its design is pleasant and modern.

Easy to use

Forever GREEN^® is easy to use. The regulator has been studied for different installation configurations and for a great appication  flexibility.

Forever GREEN^® is also easy to install and to put into operation. This reduces the related costs and the risk of mistakes.

Management Electronic Control

Forever GREEN^® is equipped with a digital module that manages the heat pump elements and makes a complete diagnostics in case of an error.

ETC...

Forever GREEN^® has number of optionals, which can be selected in order to optimally face any technical situation.

 Tel: +41 (0)91 873 97 66 
 Fax: +41 (0)91 873 97 80